| Detection Depth: | 10m | Detection Length: | 5km |
|---|---|---|---|
| Pipeline Route Location: | Yes | Pipeline Buried Depth Location: | Yes |
| 3 Detection Modes: | Yes | ||
| Highlight: | Underground Pipeline Locator High Precision,RD8200 Pipeline Locator Depth Measurement,Underground Pipeline Locator Industrial MRO |
||
The pipeline detector is a versatile cable path identification detector. It has multiple functions such as pipeline path detection, cable identification, and pipeline ground fault location. The instrument consists of A transmitter, a transmitting current clamp, a receiver, a receiving flexible current clamp, connecting test leads, a stethoscope (optional), an A-frame (optional accessory), etc.
Pipeline path detection: It can be used in trenchless conditions for path detection of metal pipelines and underground cables, pipeline census and depth measurement. The instrument uses a variety of filter technologies, has a certain anti-interference ability, can accurately locate and measure depth, is suitable for the detection and inspection of various underground metal pipelines, pipeline management and maintenance, municipal planning and construction, power supply and other departments' pipeline inspection, is one of the essential instruments for pipeline maintenance units. This function is achieved through the combination of a signal transmitter, receiver, signal transmitter clamp and connection test line.
1. Multiple detection modes: Classic positioning mode, wire cruise mode, signal curve mode.
2. Classic positioning mode: Compass, direction and signal amplitude display, visually showing the left and right directions of the pipeline.
3. Wire cruise mode: 360° all-round pipeline path indication, continuously showing depth, current and pipeline relative position. The interface is simple and intuitive, allowing you to operate without experience.
4. Signal Curve mode: Displays the historical signal strength curve, and by observing the changes in the curve, locate the cable position.
5. Current direction determination (for some frequencies) : By calibrating the current direction, it can eliminate the interference of adjacent lines and prevent tracking errors.
6. The analog line color of the pipeline shows the intensity of signal interference in real time.
7. Built-in sweep test function, allowing users to select the appropriate signal frequency for pipeline measurement based on the sweep results to avoid co-frequency interference.
8. Fully digital high-precision sampling processing: stable and reliable, ultra-high sensitivity, extremely narrow receiving passband, strong anti-interference ability, and can fully suppress power frequency and harmonic interference from adjacent operating cables and pipelines.
9. Multiple detection frequencies: 12 active detection frequencies and 2 passive detection frequencies.
10. Multiple signal output modes of the transmitter: direct output, clamp coupling, induction method.
11. The transmitter digital power amplifier features high-power output, fully automatic impedance matching and fully automatic protection.
Cable identification: Designed for power cable engineers and cable workers to solve the technical problems of cable identification. It can identify live cables and power cables. The user can accurately identify one of the target cables from multiple cables through the instrument, avoiding a serious accident caused by accidentally sawing live cables. When identifying the cables, 10 cables can be pre-marked at the transmitting end and then received at the remote end for identification, which greatly saves the time for engineering personnel to travel back and forth and improves work efficiency. Mark √ for successful cable identification and × for non-target cables, which can quickly and automatically identify target cables. This function is achieved by the signal transmitter, receiver, signal transmitter clamp, connection test lead, and flexible clamp working together.
Signal transmitter: A signal transmitter used for pipeline path detection and cable identification. The device can add identification signals to target cables by means of direct output, clamp coupling, induction, etc. There are 12 different pulse signals to choose from: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz and 201kHz. The signal has a maximum output power of 10W and is adjustable in 10 Settings. Thus adapt to different application environments and make pipeline detection and cable identification more accurate and reliable. The instrument is equipped with a high-power rechargeable lithium battery, automatic impedance matching, and fully automatic protection. The main unit features a 5.6-inch color capacitive touch LCD screen that shows the signal output status and battery usage in real time.
Transmitter clamp: Compatible with caliper coupling method. The transmitter clamp couple the signal from the transmitter to the target cable. The clamp size is Φ150mm. The transmitter clamp has directionality, and the transmitter signal flows in from the direction indicated by the arrow on the transmitter clamp.
Receiver: Used for pipeline path detection and cable identification signal reception. Built-in multiple shielded 3D antennas It can effectively identify 12 different pulse-coded current signals generated by the transmitter, including 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz and 201kHz. It can also identify 50Hz and 60Hz power frequency signals. With a 4.3-inch color capacitive touch LCD screen, real-time dynamic display of 360° all-round pipeline path indication, depth, current and pipeline relative position.
A-frame (optional accessory) : A voltage signal sensor shaped like an A, specifically designed for ground fault location of buried cables. The two probes or probes of the A-frame can accurately receive the step voltage signal from the transmitter, transmit it to the receiver for data analysis to precisely locate the ground fault point of the cable. The probe or probe plate is designed to be independent and interchangeable. The probe is suitable for dirt ground, and the probe plate is suitable for cement roads where it cannot be directly inserted into the ground. The A-frame lead-out wire is designed with an aviation socket that, in conjunction with an aviation plug connection wire, connects to the receiver. It can be removed at will and is compatible with the independently designed handle to enable the A-frame to work independently for other functions.
Flexible current clamp: For cable identification. The current clamp is a Rogowler coil with excellent transient tracking ability, which can quickly identify the pulse-coded current generated by the transmitter and is suitable for thick cables or irregularly shaped conductors. The inner diameter of the clamp is 200mm, no need to disconnect the line under test, non-contact measurement, safe and fast.
Special note: When identifying power-off cables, do not connect them to live cables. Live cable identification is only applicable to three-core armored cables. When identifying, do not mix the transmitting clamp and receiving clamp, and ensure the consistency of the input signal direction.
| Product Name | Underground Pipeline Detector |
| Model | BAXIT-RD8200 |
| Detection depth | 10m |
| Detection length | 5km |
| Pipeline alignment positioning | √ |
| Pipeline burial depth positioning | √ |
| Three detection modes | √ |
![]()
![]()
1,Receiver Specifications
| Functions | Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification |
| Power source | 7.4V DC 6400mAh rechargeable lithium battery |
| Input method | Built-in receiving coil; External connection flexible caliper; External A-frame |
| Receiving frequency |
Active detection frequencies: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 201kHz Power frequency passive detection frequency: 50Hz, 60Hz |
| Pipeline detection mode | Wide peak method, narrow peak method, sound valley method |
| Pipeline detection shows | Classic positioning mode, wire cruise mode, signal curve mode |
|
Pipeline detection Detection range |
Direct connection method: Generally, it can reach 0-20 kilometers of cable length, mainly determined by ground resistance, cable resistance and the depth of cable burial Coupling method: Generally, it can reach a cable length of 0-10 kilometers, mainly determined by grounding resistance, cable resistance and cable burial depth Induction method: Applicable to cables buried at a depth of less than 2 meters |
| Depth accuracy | Planar position precision positioning accuracy: Central axis position of the target cable or pipeline: ±5% (buried at 0-3m) -15% (buried at 3m-20m) |
| Sound indication | The frequency-modulated tone that varies with signal strength |
| Bluetooth communication | Support Bluetooth communication for instrument control, and connect to a mobile APP for various data processing |
| Network communication | Built-in 4G network for remote control |
| Interference distance |
When using the coupling method and the induction method, the transmitter generates interference at close range. The distance of interference is related to the transmission power and frequency. The greater the power and the higher the frequency, the stronger the interference. The minimum distance between the receiver and the transmitter is often determined by experimentation: Pipeline detection: The coupling method is 5 meters away, and the induction method is 20 meters away can be confirmed as interference-free Cable identification: No interference can be confirmed from 5 meters away by coupling method |
| Cable Identification |
Identification method: Flexible caliper intelligent identification; Number of cables that can be calibrated: 1 to 10; Calibration value: One of the conditions for successful identification is that the current percentage of the received signal to the transmitted signal is between 75% and 135% of the calibration value; Directionality: The transmitting clamp, receiving clamp and loading signal must be in the same direction, which is one of the conditions for successful identification |
| Cable identification &detection range |
Direct connection method: Can identify signals with loop resistance ranging from 0Ω to 8kΩ (generally up to 0-20 kilometers of cable length, mainly determined by ground resistance and cable resistance) Coupling method: Signals with loop resistance ranging from 0Ω to 1kΩ can be identified; (Generally up to 0-10 kilometers of cable length, mainly determined by ground resistance and cable resistance) |
| Liquid crystal | 4.3-inch capacitive touch LCD screen |
| Satellite positioning | Built-in satellite positioning module, supporting satellite positioning information storage |
| Ruler inches | About 336.5mm*140.6mm*785.3mm |
| Mass | 1.90 Kg |
| Charger | Dc 8.4V, 1A |
| Connection interface |
1*USB port (for firmware upgrade to charge your phone) 1*DC charging port 1. Flexible caliper connection socket |
| Flexible current clamp | About 620mm in length, about 8mm in wire diameter |
| Inner diameter of the flexible coil | Phi 200 mm |
| Test line |
1X red test line 3m 1X black test line 3m |
| Operating temperature and humidity | -10 ° C to 40 ° C; Below 80%Rh |
| Storage temperature and humidity | -10 ° C to 50 ° C, ≤ 95% RH, no condensation |
| Pressure resistance | AC2000V/rms(before the front and rear ends of the housing) |
| Fit for safety regulations | Iec 61010-1 CAT Ⅲ 600V, IEC61010-031, IEC61326, Contamination Class 2 |
2,Transmitter specifications
| Functions | Multiple frequency signal transmission modes for pipeline path detection, cable identification, and fault location |
| Power source | 11.1V DC 12800mAh rechargeable lithium battery |
| Output mode | Direct output, induction, caliper coupling |
| Output frequency | 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 201kHz |
| Output power | 10W Max, 10 stops adjustable, fully automatic real-time impedance matching |
| Connect the output voltage directly | 150Vpp MAX |
| Circuit protection | With overload and short-circuit protection |
| Liquid crystal | 5.6-inch capacitive touch LCD screen |
| Instrument Size | Approximately 332.9mm*228.5mm*192.3mm |
| Mass | Transmitter 3.85Kg; Transmitter clamp 1.12kg |
| Charger | DC 12.6V, 1A |
| Launch clamp size | Length, width, thickness 250mm×140mm×35mm |
| The inner diameter of the launch clamp | Phi 150 mm |
| Launch clamp wire length | 3m |
| Connect the test leads directly | 3m |
| Connection interface |
1*USB interface (for firmware upgrade, can charge the mobile phone) 1*Type-C charging port 1*DC charging port 1* Signal transmitter clamp and DC test lead connection socket |
| Withstand voltage | AC 3700V/rms(before the top and bottom of the instrument box) |
| Electromagnetic characteristics | IEC61326(EMC) |
| Fit for safety regulations | IEC61010-1(CAT Ⅲ 300V, CAT IV 150V, Contamination Class 2) |
3,Optional features
| Troubleshooting location | With the A-frame, precise location of cable ground faults can be achieved |
| Mapping APP | Use the APP in conjunction with the receiver to achieve satellite positioning pipeline mapping capabilities, enabling positioning measurement, management and viewing of geographic coordinates, depth and other information of underground pipelines, and providing cloud services for data storage, backup, transfer, etc |
| Remote control | The receiver can control the parameters and output of the transmitter through the 4G network |
| Stethoscope | Can replace flexible coils for cable identification |
| RTK | Use RTK devices for centimeter-level high-precision positioning, and use a dedicated APP with a handheld device for precise mapping of pipeline locations |
4,The function mode supports frequency tables
| Instrument | Function Interface | Frequency list |
| Receiver | Wire cruise mode, Classic positioning mode, signal curve mode |
There are 14 frequencies to choose from: 50Hz, 60Hz, 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 201kHz |
| Cable Identification | 50Hz, 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz | |
| Transmitter | Path detection mode |
Direct connection method: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, a total of 11 frequency options. Coupling method: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 201kHz, 12 frequencies in total; Induction method: 33kHz, 82kHz, 201kHz, 3 frequencies in total; |
| Cable identification mode |
Direct connection: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 11 frequencies; Coupling method: 577Hz, 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4.09kHz, 8.19kHz, 10kHz, 33kHz, 66kHz, 82kHz, 11 frequencies; |
|
| Fault Location mode | Direct connection: 640Hz, 1280Hz, 2.56kHz, 3.20kHz, 4 frequencies |
It can be used in trenchless conditions for path detection, pipeline census and depth measurement of metal or non-metal pipelines and underground cables. The instrument uses a variety of filter technologies and has a certain anti-interference ability to accurately locate and measure depth. It is suitable for the detection and inspection of various underground metal pipelines, pipeline management and maintenance, municipal planning and construction, power supply and other departments' pipeline inspection, and is one of the essential instruments for pipeline maintenance units.
1. who are we?
We are based in Shanghai, China, start from 2017,sell to North America(20.00%),Western Europe(15.00%),South America(10.00%),Oceania(10.00%),Northern Europe(10.00%),Eastern Europe(10.00%),South Asia(5.00%),Southern Europe(5.00%),Central America(5.00%),Africa(5.00%),Southeast Asia(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Differential Scanning Calorimeter, Thermogravimetric Analyzer, Differential Thermal Analyzer, Oxygen Bomb Calorimeter, Spot Cooler
4. why should you buy from us not from other suppliers?
We have 10 years of experience in design and development. The price preferential benefit There is a lot of goods in stock The service is good
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,DDU,Express Delivery,DAF;
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,Credit Card,Western Union;
Language Spoken:English,Chinese