Send Message
products

Flat Plate Thermal Conductivity Meter With Steady State Method

Basic Information
Place of Origin: China
Brand Name: BAXIT
Certification: CE
Model Number: BXT-DRP-II
Minimum Order Quantity: 1unit
Packaging Details: Wooden package
Delivery Time: 3-5 working days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 10000UNITS
Detail Information
Power Supply: AC (220±10%) V, (50/60) HZ Digital Thermometer: Measurement Accuracy: 0.5%±1 Word
Timing Range: 0~100min Minimum Resolution: 1S
Measuring Temperature Range: Room Temperature~100℃ (maximum Heating Temperature 120℃) Heating Voltage: 36VAC
Test Material: Duralumin, Rubber, Air, Etc. Continuous Working Time: >8 Hours
Thermal Conductivity Test Range: 0.1~300w/m·k
High Light:

Flat Plate Thermal Conductivity Meter

,

Integrated Digital Thermal Conductivity Meter

,

AC220V Thermal Conductivity Meter


Product Description

BAXIT Thermal conductivity tester BXT-DRP-II

 

 

Product introduction:

Thermal conductivity (thermal conductivity) is a physical quantity that reflects the thermal conductivity of materials. It is not only a basis for evaluating the thermal characteristics of materials, but also a design basis for materials in application. This parameter must be involved in engineering practice such as design. Because the thermal conductivity of a material not only changes with temperature and pressure, but also the impurity content and structural changes of the material will obviously affect the value of the thermal conductivity. Therefore, the thermal conductivity of the material is usually measured by experimental methods in scientific experiments and engineering technology.

The methods of measuring thermal conductivity can be roughly divided into two types: steady-state method and dynamic method. This tester adopts the steady-state method to measure the thermal conductivity of different materials. The design idea is clear, simple, and the experimental method is typical and practical. Measuring the thermal conductivity of a substance is an important content in thermal experiments.

This tester is composed of heater, digital display thermometer, digital display timer, etc. (integrated design)

 

Technical Parameters:

 

Power supply AC (220±10%) V, (50/60) HZ
Thermal conductivity test range 0.1~300w/m·k

Thermal conductivity

measurement accuracy

≤10%
Digital chronograph Timing range 0~100min
Minimum resolution 0.1S
Accuracy 10-5
Measuring temperature range

Room temperature~110℃ (maximum heating

temperature 120℃)

Heating voltage 36VAC
Heat dissipation copper plate Radius 65mm
Thickness 7mm
Mass 815g
Test material Duralumin, rubber, air, etc.
Continuous working time >8 hours
 
 

 

Included listcking:

Thermal conductivity tester 1 set
Power cable 1unit
Dedicated measuring thermocouple 2 pieces
Thermos cup 1unit
Test sample (duralumin, rubber) 1unit
User's manual 1unit
Product certification 1unit
 

 

 

Contact Details
Clarke

Phone Number : +8615001723665

WhatsApp : +8615001723665