products

Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine

Basic Information
Place of Origin: China
Brand Name: BAXIT
Certification: CE
Model Number: BXT-841
Minimum Order Quantity: 1SET
Packaging Details: 420*195*332mm
Delivery Time: 5-8work days
Payment Terms: L/C, T/T
Supply Ability: 100+sets+5days
Detail Information
Place Of Origin: Shanghai, China Certificate: CE
Warranty: 12 Months Model Number: GLO-5622B
Application: Ink Friction Stroke: 60mm
Power Supply: AC 220V 50Hz Friction Area: 50*100mm
High Light:

Ink decolorizing test machine

,

Printing Ink Abrasion Test Machine

,

60mm Friction Stroke Abrasion Test Machine


Product Description

Printing Ink Abrasion Test Machine Ink decolorizing test machine

Introduction:

1. use: Ink and print, color box wear resistance, decolorization degree test.

2. the principle:This machine judges the wear resistance and the degree of decolorization by rubbing between the measured material and the white wood forest paper.

Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 0

 

Instrument installation:

The color printed product or finished product containing ink should be placed for 24 hours before testing. After cutting to a width of 60mm×210mm, it is fixed on the friction table, and the surface of the test article cannot afford to be unclean.

Experiment procedure:

After removing the upper friction body, the length and width of the white doline paper of 50 mm×200 mm were taken and fixed on the upper friction body (on the black rubber body).

1. the sample to be tested is fixed on the lower friction table in four steps.Second, the upper part of the paper wrapped with white wood is rubbed and fixed on the transmission arm, and the weight is set again. Open the calculator box and set the number of frictions. The friction speed is (21/42/85/106 times/minutes adjustable).

2. press the 0N/OFF switch, the number of friction can be automatically shut down for a set number of times.

Maintenance procedures:

1. clean: Keep the machine clean at any time, wipe the machine table with a cotton cloth before and after each use to keep it clean.

2.anti-rust: spray anti-rust oil on the surface of the machine once a week (after 2 hours of injection)

3. the oil: regular monthly lubrication of the sliding parts of the machine table (use ordinary lubricants can be)

Product parameters:

Friction speed adjustable speed (21/43/85/106) r/min
Friction load 908g, 1810g
Friction stroke 60mm
Friction area 50*100mm
Number of times 0-99999 automatic shutdown
Power 40W
Machine size 300×325×300cm

 

 

Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 1Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 2Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 3Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 4

Packaging & Shipping

1. Aluminium box and carton box, careful and tight package, make sure the package is intact

2. The package will be shipped by DHL/Fedex/TNT/EMS/UPS/China post/EF-Express/Special line, as you have chose in the order.

Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 5

Our Services

 

If you encounter with any problems during the testing process,we promise providing urgent guidence and after-sales sevice within 48 hours and solution providing within 3 working days. If customers require on-site service, the transport and travel expense shall be responsible for the cost.

1. Pre-service

24 Hours online service for customers' consultation.

2. Middle service

--Fullfill customer's request:

--Payment method depends on customer.

--Promptly production and delivery

--Can provide invoice value if you want to decrease your tax.

3. After sale service

--One year warranty service and all life maintenance.

--Technical Egineer are avalible for oversea trainning.

--Remote control technical consult

 
Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 6Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 7Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 8Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 9Printing Ink Abrasion Test Machine Ink Decolorizing Test Machine 10

Shanghai Glomro Industrial Co., Ltd was founded in 2012. Specializing in the production of testing equipment and industrial measurements and instruments products. Products of high quality, fashionable, widely used in a variety of industrial areas, not only has the broad masses of the domestic sales market, but also exported to Europe and the United States.
Glomro hinge over the years has always adhered to "quality of products in order to survive, credibility and development services" business purposes. Committed to providing you with high-quality products and quality services. Have a professional, dedicated design management team, from product design, mold making, molding to the Product assembly, for each aspect and processes are rigorously testing and control.

Over the past few years of production and management and exploration, Longtai set up its own quality management system. Industry standards including SAE,IEC JEDEC,ASTM and MIL-STD,ISO:9001,UL,CE certified. Glomro always implement the concept of customer value creation for customers tailored products to meet the needs of different customers, and continuously provide customers with solutions to technical problems,further exploration innovation,and excellence.

Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner!

FAQ

 

Q:Are your company a trading one or a factory?

A:Factory + trade (integration),More than 10 years focusing on test instruments field,6 years exporting experience.

Q:After an order is placed, when to deliver?

A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days. Please be aware that our production lead times depend on specific items and item quantities.

Q:What about the warranty with after - sales services?

A:The testing machine is guaranteed for 12 months by Shanghai Glomro Building Industrial Co.Ltd ,One year promise including free maintenance and changing Instrument components.Besides, Full-life cycle technical support is provided.

Q:What about the product' services and quality?

A:Each instruments must be carried out 100% quality examination and test when shipping and delivery goods. each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer’s company when you need.

Contact Details
Clarke

Phone Number : +8615001723665

WhatsApp : +8615001723665